product
-
Efficient type CNC four sides cutting saw
Industrial production model, heavy-duty all-steel structure welded, and treated by material stress analysis and tempering effect, it is firm and not deformed.
Efficient type CNC four sides cutting saw
-
Economical type CNC four-side cutting saw
1.Industrial production model, heavy-duty all-steel structure welded, and treated by material stress analysis and tempering effect, it is firm and not deformed.Economical type CNC four-side cutting saw
-
Wooden door temporary storage machine
This device is normally used on the wooden door production line, If the production line is overloaded in the production line before or after the processing, it means the board cant in-put or out-put, then the board on-line need a place to temporary storage.Wooden door temporary storage machine
-
Jacking packing machine
When the workpiece is transported to the jacking packing machine the bracket will be automatically jacked up, which is convenient for workers to do the packing. When the packaging is completed, the worker presses the start button, the pallet will be lowered, and the board will be transported to the next station through the conveyor belt.Jacking packing machine
-
Sanding + Angle rounding+ Polishing linear sander
Customized made machine to achieve the sanding requirement. Sanding heads, sanding rack, sanding belt configuration， all design by custom demand.Sanding + Angle rounding+ Polishing linear sander
-
Panel end polishing and sanding machine
Through type wooden door/ panel ends sanding and polishing, it is special design for production line sanding process.Panel end polishing and sanding machine
-
3T lifter table
Lifter with Forklift hole Table size: 2400*1240mm Max loading weight: 3000kgs Machine height: 470~1770mm3T lifter table
-
C type lifter table
Lifter table size： 1550*1342mm*90mm (oversize is not fixed, maybe changeable) Working height： 90～900mmC type lifter table
-
E type lifter table
Lifter table size：2000*1300*150mm Working height： 150~1100mmE type lifter table
-
Lifter table combination with sponge suction cup
Just put the sheet on the lifting table, the suction arm with the sponge suction cup will suck the sheet up, slide it through the linear guide rail, and send the sheet to the roller table.Lifter table combination with sponge suction cup
-
Lifter table combination with pushing arm
Just put the sheet on the lifting table, the pushing arm will push the board to the working point. Then the pushing arm will move back to HOME, and await for next working instruction.Lifter table combination with pushing arm
-
Roller type lifter table
Lifter table size：2500*600*300mm Working height： 300~1250mmRoller type lifter table
-
Whole pack turnover machine
This products are mainly use for plywood panel, laminated board, chipboard factories. It uses for whole pack of panel 180 degree turnover. It can allow to turnover and stop in any degree between 0~180 degree.Whole pack turnover machine
-
ON-Line turnover machine
ON-line to do the panel turning, make the board 180 degree turning without landing on ground. Servo for controlling, make the turning lightly and stable.ON-Line turnover machine
-
Pole type turnover machine
The pole type turnover machine cooperates with the conveying roller table to turn the board online, so that the workpiece does not need to fall to the ground to complete the turning action.Pole type turnover machine
-
Windmill type turnover machine
The windmill-type turnover machine cooperates with the conveying roller table to turn the board online, so that the workpiece does not need to fall to the ground to complete the turning action.Windmill type turnover machine
-
Power-driven ground roller
It is suitable for conveying plates, new type of materials or wooden doors. The maximum loading capacity is 3000kgs. Heavy duty type. The equipment has forklift holes, which is convenient for loading and unloading by forklifts.Power-driven ground roller
-
Centering Roller Table
The workpiece enters the centering roller table through the running roller, and the cylinders on both sides automatically push the workpiece to the middle position or to the side. After the centering is completed, the cylinder will automatically return to the original position, and the plate will be transported to the next station.Centering Roller Table
-
Special roller table for feeding edge banding machine
Machine size: (1200+1500)*4000mm Roller surface size: 1000mm+1280mm two types Beam aluminum rack size: 52*260mmSpecial roller table for feeding edge banding machine
-
Synchronous belt series belt conveyor
Machine size: 1100*2500mm Working surface size: 990*2500mm Beam aluminum rack size: 52*260mm Steel plate bending supporter: 250mmSynchronous belt series belt conveyor
